In short, the main function of the tire pattern is to increase the friction between the tread and the road surface to prevent the wheel from slipping, which is the same as the sole pattern.

Diagonal tire (bias tire) is also called ordinary tire. Refers to a pneumatic tire in which the carcass ply and the cords of the adjacent layer of the buffer layer intersect and are arranged at an angle of less than 90 ℃ with the center line of the tread.

In order to reduce the number of defects in finished tires, reduce production costs, and improve the company's competitiveness, it has gradually become a trend to install foreign body detection devices in the cutting process of all-steel radial truck tires.

With the development of tire production technology, the development direction of tires is constantly changing. Electric vehicle tires, safety tires, green tires, low-profile tires, etc. are all development directions that have attracted much attention.

26. 5-25 28PR engineering machinery tires' main technical parameters are as follows: standard rim 22.00/3. 0, inflated outer diameter (D′) 1750 mm, inflated section width (B′) 675mm, level 28pr, pattern code E3E , It is recommended to use inflation pressure of 475kPa, rated load of 15500kg, and driv......

In view of the high load of port tires and frequent steering during operation, the bottom of the tire tread groove is prone to cracks. we analyze the reasons in time and formulate solutions.